2008-2009 Ford Escape Mercury Mariner 3.0L Belt Diagram
1. Secure and raise your vehicle.
2. With the vehicle in NEUTRAL, position it on a hoist.
3. Remove the pin-type retainer, 5 bolts and the RH lower splash shield.
4. Using a suitable belt tensioner release tool, rotate the accessory drive belt tensioner counterclockwise and remove the accessory drive belt.
*Before installing a new belt, be sure to check all of the pulleys and make sure they are clean and are not damaged.
Installation is reverse of removal.
Make sure route the belt properly, according to the diagram above.