Serpentine Belt Diagrams

This diagram is for the 2001-2005 Ford Escape. It shows the 2.0L, 2.3L and 3.0L engine diagrams. All three engine sizes have the diagrams for engines with or without AC.

Removal Start by removing the air cleaner and the air compressor pipe bracket. Now jack up the front end of your vehicle and support it securely. Be sure to apply…

Mobile users click here for diagram. Removall Remove the engine cooling fan and the shroud. Rotate the tensioner pulley clockwise and remove belt.Inspect all of the pulleys and make sure…

Removal Removing the belt from the Cadillac Seville may require a serpentine belt removal tool. Using the 1/2 size, rotate the tensioner pulley to relieve tension from the belt. Slip…

This diagram fits the following vehicles with the 3.8L engine: Century, Grand Prix, Impala, Intrigue, Lumina, Monte Carlo, Regal Removal and Inspection Using a 15mm wrench or socket, rotate the…

Removing the belt can be done with a half inch ratchet with a short extension. The center hole on the tensioner pulley is a half inch hole. Using the ratchet,…

Removal: To remove the old belt simply rotate the tensioner pulley with with a socket grabbing the center bolt on the tensioner. Slip the belt off the closest pulley and…

Here is the Diagram for the 1999-2003 Ford Windstar that was requested in the forum. The diagram includes the 3.0L and 3.8L Engines.

Here is a diagram for the Suzuki Vitara. This works for years 2000-2006. Including the 1.6 liter, 1.8 liter and the 2.0 liter. With and without A/C and power steering…

To remove the old belt rotate the tensioner pulley counter clockwise, slide the belt off and slowly release the tensioner pulley. Inspect all the pulleys and make sure they are…